| |
|
| |
Dexygenized Gas Pressure Injector:IP-8 |
 |
| |
- It is a device injecting anoxia gas in an airtight culture container.
- Completely removing the oxygen of mixtures by letting
a built-in reaction pipe go through
- Because I completely make the plumbing sealing up system,
I come by injection pressurization to greatest 0.2Mpa.
- It is done temperature control, and the most suitable
temperature can maintain a reaction pipe.
- When I was overheated by any chance, I intercept a heater
power supply by prevention function of a temperature rise.
- I can grasp exhaust, the injection pressurization situation by
meter at first sight.
- I can connect an airtight culture container to 8 at the same
time.
- An attached filter, injection needle can easily do disassembly, and autoclave sterilization is possible.
|
| |
| Model number |
Article name / a product summary |
Price
# tax goes without it |
| IP-8 |
Dexygenized Gas Pressure Injector:IP-8 |
Yen 700,000 |
| IP-8 |
Dexygenized Gas Pressure Injector:IP-8
(I am belonging to the vacuum pump outside)
|
Yen 800,000 |
|
 |
A use |
| |
It is a device injecting anoxia gas in an airtight culture container for methane bacteria culture of an anaerobic bacterium. Vacuum exhaust and anoxia gas injection can easily pressurize it with one knob by putting a thorn in an exclusive airtight culture container (a pressurization culture test tube). |
|
Machinery specifications, others |
| |
■ Main body specifications
| External form dimensions |
W480 X D370 X H675mm |
| Weight |
23kg |
| Power supply |
AC100V, 250W |
| Constitution and control of deoxidation department |
Materials of a reaction pipe |
Stainless steel |
| Catalyst |
Reduction copper |
| Overheat department heater |
A stainless steel sheath heater
100V, 200W |
| Temperature control system |
Electronic temperature control device
(I switch it on/off by a CA thermocouple use relay and control it) |
| Temperature range |
0-400 degrees Celsius |
| Setting temperature |
220 degrees Celsius |
| Gas pressure indication |
- 0.1Mpa to 0.3Mpa |
| Filter for prevention of various germs pollution |
Materials |
A syringe made by stainless steel
(Glass wool filter inside ) |
| Amount |
8 |
| An injection pressurization needle |
Materials |
Stainless steel |
| Dimensions |
0.8 Φ x 30mm |
| Amount |
8 |
| Kind of use gas |
It is a mixture including hydrogen as a general rule |
| Gas connection mouth shape |
1/8 inches black nylon tube 4m attachment.
In nylon tube tip 1/8, a female connector is with it.
(I connect a gas regulator to this part.) It is possibility for change to push one couplings;). |
Main body side vacuum pump mouth shape
# A vacuum pump with an option Correspondence： Attaching externally
|
■ Time without a vacuum pump
A Φ 10.5 bamboo shoot hose mouth hose is attached.
The hose which I do not do it, but exhaust lengthiness of a reel of film or tape of Φ 20X7 .5 . Werecommend it.
■ When a vacuum pump is with it
1/8 push one couplings.
Transparent urethane tube Φ 8X5mm2m is with it .
|
■ Vacuum pump specifications (as for the vacuum pump, for it with an option)： Attaching externally)
|
| Model name |
A diagram Fulham type doh rye vacuum pump |
| An exhaust velocity |
50Hz:7L/min
60Hｚ:8L/min |
| Arrival pressure |
400Pa. 3Torr |
| A use motor |
One Φ 100V 4P condenser orchid .
It is with a thermal protector (automatic return type) |
| The rating output |
40W |
| A rating electric current |
50/60Hz 1.1A |
| Turn speed |
50Hz 1250r.p.m
60Hz 1500r.p.m |
| Use atmosphere temperature |
7-40 degrees Celsius |
| Appearance dimensions |
W200XD252XH170mm |
| Weight |
6kg |
| Inlet port shape |
Push one coupling EC8-PT1/8 |
| Inlet port connection |
Urethane tube transparence
U2-4-8X5(Diameter 8x5mm X 2m attachment) |
|
|
User's Manual Download |
| |
|
|
|
|
|
|
|
|
|
|
|
|
| |
|
|
| |
SANSHIN INDUSTRIAL
CO., LTD. |
1-32-6,Takadahigashi,Kohokuku,
Yokohamashi,Kanagawaken,
Japan,223-0065 |
| TEL: |
81-45-531-7741 |
| FAX: |
81-45-531-9345 |
|
|
|
|
|
|
